CARBURETOR CONVERTER CARBON WASHING KIT
Product Introduction
•Use the safety machine elevates the vehicle and hangs up the tools at appropriate position
to near the O2 Sensor. •Fill cleaning reagent into the tank about 200 c.c. and lock the cap.
Connnect air power , Pre-setting working pressure at 25~30 psi form the tool's regulator.
•Provide with the safety valve ,pre-setting 35PSI(2.5Kg/cm? The exceed pressure will be
relief automatically.. •Disassemble the O2 Sensor nut and lock the plastics nut onto the O2
Sensor female nut. •Put the clean pipe into the plastics inside diameter.
•Open check valve. Then cleaning reagent will to become bubble filled
into the Carburetor converter. •When the cleaning liquid spraying
completes, Remove the lead hose and take out the plastics nut. •Pick up
the tools and lock the O2 Sensor nut. •Wait about 5 minutes after to
start the engine ,Then Carburetor converter carbon liquid will outlet follow
the exhaust pipe . The cleaning working will be finished.
